National Service Hotline


Contact us

SkyFlag Furniture Co.,Ltd.

Address: NO.1188 Waihuanxi Road , Jiashan County, Zhejiang Province. China 314100

Tel: +86 573 8402 7548

Fax: +86 573 8402 7548


Mobile/Whatsapp/Wechat: +86 13761025340

Contact:Mr. Luke Chen(Sales Manager)

Your current location:Home>News>common problem
What is the difference between the process of dyed veneer and natural veneer?
Announcer:嘉善嘉垚  Views:3426

With the wide application of veneer veneer products and the development of the market, dyed veneer has gradually been derived, but many people still don't know much about this dyed veneer. Today, we will discuss together: What is the difference between the process of dyed veneer and natural veneer? What problems should be paid attention to when using glue for dyed veneer?

Natural veneer

Natural veneer is a natural wood, with natural texture and color that has not been artificially modified, and is used for veneer decoration of furniture and other products. The veneer process using natural veneer has the same appearance as those of solid wood furniture, but natural veneer also has some defects, mainly manifested as color difference, scarring, and round holes.


And some people like these natural defects, because the texture and color of natural veneer cannot be changed, so it has a natural beauty and original artistic sense. The decoration of natural wood veneer in the furniture and interior makes the entire home space simple and generous, reflecting the elegance and dignity of the homeowner, and shaping the warm meaning of returning to nature for the home.


Stained veneer

Dyed veneer is generally based on high-grade natural veneer with fewer defects. The veneer is obtained by using high-tech dyeing technology to change the color of natural veneer; there are also some whole wood after dyeing, we call it dyeing Wood, veneer processed from this type of dyed wood is also dyed veneer.


The natural solid wood veneer is dyed to retain the original natural texture and texture of natural wood. During the processing process, it compensates for the color difference and single color of natural veneer. At the same time, it can also form fashionable and novel new styles by changing the color. Let consumers have more choices.


Veneer dyeing, solid wood dyeing and standing wood dyeing are commonly used for dyeing veneer.

The so-called veneer dyeing refers to the uniform dyeing of the rotary cut or sliced veneer by the dipping method, and the thickness of the veneer is generally 0.2~1mm. The dyed veneer can be used as a component material of artificial board veneer, furniture veneer and artificial artificial wood.

Solid wood dyeing refers to the surface and internal dyeing of solid wood. In the production of solid wood technology, it is necessary to dye the interior of the solid wood (the dyeing depth exceeds 1cm). Due to the high thickness of solid wood, it is difficult for the dye to penetrate under normal conditions, so pressurized and reduced pressure dip dyeing or steaming method is required to process dyeing.


The dyeing of standing wood refers to the method of using the sap flow produced by sap transpiration as a natural driving force to disperse the dye solution to the dry part of the tree to stain the wood. Using this method is not only fast dyeing speed, but also the dyed state of the fine structure of the dyed wood can be seen clearly, and sufficient vividness can be maintained.

Precautions for glue for stained veneer

Dyed veneer is prone to cracking, discoloration and other problems during the process of dyeing and color changing, so it is best to use fast-drying high-quality veneer to reduce damage to the veneer.


Pay special attention to the hot pressing and staining of veneer: the time cannot be too long and the temperature cannot be too high! It is recommended that you use Fushen Hot Pressing Laminating Adhesives GW-6525 and GW-6525A: these two glues have better flexibility and will not cause the adhesive layer due to thermal expansion and contraction or internal stress during the process of hot pressing and cooling. Or the veneer is cracked, and it has the characteristics of long open time, no glue overflow, high temperature resistance, short hot pressing time, no damage to the veneer, and high production efficiency.


If it is hand-applied, you can use Fushen hand-applied glue GW-6565 and GW-6566A: these two glues can be light ironing and non-ironing, and dry quickly in 3-5 seconds without foaming, which greatly simplifies The most important thing about the pasting process of dyed veneer is that it is repairable, which can greatly reduce the rework rate and reduce material loss.

Seeing here, I believe that everyone knows the characteristics of natural veneer and dyed veneer. The texture of natural veneer cannot be changed, and it has a natural beauty. The dyed veneer can be dyed into different colors through the dip dyeing process to satisfy different customers. Demand.

Mobile station